Anchor rode locker
My original plan was to install rigid divider in the locker, to separate oars from anchor rode. I started building it but half-way changed my mind.
Instead I decided to make a bag which will keep flaked rode and protect the locker from wear. I used rubberized polyester canvas with transparent “window” at the bilge - feature which will enable seeing under the bag, for whatever reason.
This material is a bit stretchy so I could span it between both ends, to keep it neat.
Front side is closed, to prevent chain from falling into mast foot, aft part is open - to drain water into the bilge.
It keeps 50m of rope and 10m of chain within boundaries and clear of oars. I’ll see if that works in practice.